Shop By Categories
Shop By Categories
.png "Insuzo"){kind=logo}
Item(s) Added To Your Bag
Metravi DT-9250 Digital TRMS AC|DC Clamp Meter
Click To Zoom
Metravi DT-9250 Digital TRMS AC|DC Clamp Meter
Metravi DT-9250 Digital TRMS AC|DC Clamp Meter
The Metravi DT-9250 is a Digital AC TRMS/DC clamp meters with big jaw dia which can be used anywhere that high current and voltage measurements are needed. The unique feature of the DT-9250 is that it can measure Frequency through the Clamp Jaw, so it can measure the frequency at high current as well. It becomes very safe to take frequency measurements as you do not need to touch high current lines with probes to get frequency measurements.
Request Callback
Order In Bulk
Generate Quote
100% ORIGINAL Products
SECURE Payments
₹ 12,690.00
(GST inclusive price) i₹12,690.00
( - 0% OFF )
Description
What's in the box?
|
Rating & Reviews
Rating
| General Specification | |
| Clamp Jaw Opening | 2” (52mm) approx |
| Display | 3-3/4 digits (4000 counts) Backlit LCD |
| Continuity Check | Buzzer sound at less than (60±30)W |
| Diode Test | Test current of 0.5mA typical; Open circuit voltage <2VDC typical |
| Low Battery Indication | ‘ ‘ is displayed |
| Over-Range Indication | ‘OL’ display |
| Measurement Rate | 2 readings per second, nominal |
| PEAK | Captures peaks > 1ms |
| Temperature Sensor | Type K thermocouple |
| Input Impedance | 10MW (VDC and VAC) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 104°F (-20°C to 60°C) |
| Operating Humidity | Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C) |
| Storage Humidity | <80% |
| Operating Altitude | 7000ft. (2000meters) maximum |
| Battery | One (1) 9V Battery |
| Auto Range | Auto/Manual |
| Auto Power OFF | After approx. 15 minutes |
| Dimensions & Weigh | 27cm (H) x 10cm (W) x 4cm (D), 600 Grams Approx. |
| Safety | For indoor use and in accordance with the requirements for double insulation to IEC 1010-1 (2001) : EN61010-1 (2001) Over Voltage Category III 1000V and Category IV 600V, Pollution Degree |
| Technical Specification | ||
| DC Voltage | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 400mV | ± (1% + 10 digit) | 0.1mV |
| 4V | 1mV | |
| 40V | 10mV | |
| 400V | 100mV | |
| 1000V | 1V | |
| AC Voltage (T-RMS for DT-9250 Only) | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 4V | ± (1.2% + 5 digit) | 1mV |
| 40V | 10mV | |
| 400V | 100mV | |
| 1000V | 1V | |
| AC Current (T-RMS for DT-9250 Only) | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 400A | ± (3.0% +2A) | 100mA |
| 2000A | ± (3.5% + 5 digit) | 1A |
| DC Current | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 400A | ± (3.0% + 1A) | 100mA |
| 2000A | ± (3.5% + 5 digt) | 1A |
| Resistance | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 400Ω | ± (1.0% + 4 digit) | 0.1Ω |
| 4kΩ | ± (1.5% + 4 digit) | 1Ω |
| 40kΩ | 10Ω | |
| 400kΩ | 100Ω | |
| 4MΩ | 1kΩ | |
| 40MΩ | ± (2.0% + 4 digit) | 10kΩ |
| Frequency (Auto-Ranging) | |
| Range | Accuracy (% of reading + digits) |
| 10Hz to 100kHz | ± 1.0% ±5 digt |
| Frequency (Auto-Ranging) | |
| Range | Accuracy (% of reading + digits) |
| 10Hz to 100kHz | ± 1.0% ±5 digt |
| Duty Cycle | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| (0.1% to 99.9%) | ± (1.2% + 5 digit) | 0.1% |
| Temperature | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| (-20 to 1000°C) | ± (2.0% + 5°C) | 0.1°C |
| (-4 to 1832°F) | ± (3.0% + 9°C) | 0.1°F |
| Continuity | |
| Testing Condition | Reading |
| Open voltage is approx. 0.5V | Buzzer makes a long sound, While resistance is less than (60±30W) |
| Peak of AC Current | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 400A | ± (4.0% + 5 digit) | 100mA |
| 2000A | ± (4.0% + 5 digit) | 1A |
| Capacitance | ||
| Range | Accuracy (% of reading + digits) | Resolution |
| 4nF | ± (5.0% + 30 digt) | 0.1nF |
| 40nF | ± (5.0% + 20 digt) | 1nF |
| 400nF | ± (3.5% + 10 digt) | 10nF |
| 4mF | ± (5.0% + 10 digt) | 100nF |
| 40mF | 1mF | |
| 400mF | 10mF | |
| Diode | |
| Testing Condition | Reading |
| Forward DCA is approx. 0.5mA, backward Voltage is approx. 2V | Forward voltage drop of Diode |
Rating & Reviews
Rating
Similar Products
More From Brands
Request Callback
We will get in touch with you
Enter your requirement details!
We will get in touch with you.
Get ready to measure up with Insuzo where honesty meets precision in a playground of testing and measuring fun! Dive into our collection of trusted instruments and brands, because when it comes to accuracy, we're serious about making it a blast!
The Office Address
305 P.P. Trade Center, Netaji Subash Place, Pitampura, Delhi - 110034
For Support
8920884830
Send Us Email
info@insuzo.com
.png)
.png)
.png)
.jpg)
